Pass-Through Cover And Cushion, Removing And Installing: Removing

Fig 1: Prying Off Clamping Strip -2- For Backrest Cover Using A Screwdriver All Around Backrest Frame -3- -Arrow-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the pass-through. Refer to PASS-THROUGH, REMOVING AND INSTALLING .

-- Remove the locking mechanism trim. Refer to LOCKING MECHANISM TRIM, REMOVING AND INSTALLING, PASS-THROUGH .

-- For vehicles with a center armrest, remove the center armrest and the center armrest bracket from the pass-through. Refer to CENTER ARMREST, REMOVING AND INSTALLING .

-- Using a screwdriver, pry out the clamping strip -2- for the cover -1- from all around the pass-through -3- -arrow-.

-- Guide out the cover with the cushion -1- at the headrest guide.

-- Remove the pass-through cover with cushion -1-.