Seat Pan Cover And Cushion, Removing And Installing: Removing
-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Secure the seat on the Fixture for Seat Repair. Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Remove the tunnel-side seat trim panel. Refer to TUNNEL-SIDE SEAT TRIM, REMOVING AND INSTALLING .
-- Remove the backrest adjuster. Refer to BACKREST ADJUSTER, REMOVING AND INSTALLING .
-- Remove the seat height adjustment handle. Refer to SEAT HEIGHT ADJUSTMENT HANDLE, REMOVING AND INSTALLING .
-- Remove the sill-side seat trim panel. Refer to SILL-SIDE SEAT TRIM PANEL, REMOVING AND INSTALLING .
-- Remove the sill-side seat trim bracket. Refer to SEAT TRIM PANEL BRACKET, REMOVING AND INSTALLING .
-- Remove the backrest. Refer to FRONT BACKREST, REMOVING AND INSTALLING .
-- Remove the storage compartment, if equipped. Refer to STORAGE COMPARTMENT, REMOVING AND INSTALLING .
-- Release and remove the connector.
-- Free up the wiring harnesses.
Vehicles with Seat Depth Adjuster
-- Move the seat depth adjuster all the way forward.
-- Release the tabs -arrows- on the trim -1- using a :3409 .
-- Remove the trim from the seat depth adjuster.
-- Release the retaining tabs -arrow- on the support from the seat depth adjuster using the :3409 .
-- Remove the support -1- with the seat cushion and seat cover for the seat depth adjuster upward and toward the front.
-- Disengage the tabs -arrows- at the seat depth adjuster -2-.
-- Move the support with the seat cushion and seat cover upward.
-- To do so, remove the support -1- with seat cushion and seat cover for the seat depth adjuster upward and forward at the same time.
There is a risk of damaging the locking tabs.
- Proceed very carefully when clipping and unclipping.
-- Lay the support -2- with the seat cushion and seat cover on the front seat.
For better illustration the seat pan lower frame is not shown.
-- Disengage the seat cover retaining strips -1- and -4-.
-- Remove the seat cover clamping strip -3- from the seat depth adjuster.
-- To do so, pull the clamping strip forward.
Continuation for All Vehicles
-- Disengage the clamping strips -1 and 2- using the :3370 .
-- Remove the cover with the cushion from the seat pan -2-.
-- Separate the cover from the cushion. Refer to SEAT PAN COVER AND CUSHION, SEPARATING .