Driver/Front Passenger Backrest Heating Element -Z7- / -Z9-, Removing And Installing: Installing

Install in reverse order of removal and Note The Following  :

-- Guide the wire -3- through the cable guide.

-- Align the heating element -2- on the cushion -1- at the same time do not remove the protective film.

-- Remove the protective films -4- one after the other from the adhesive tape -2- at the same time do not damage the heating element.

-- Glue the heating elements so that they align with the old heating elements and are free of wrinkles.

-- Route the connections to the individual heating elements in the base of the gaps.