Driver And Front Passenger Seat Heating Element -Z6- / -Z8-, Removing And Installing: Installing

Install in reverse order of removal and Note The Following  :

-- Guide the wire -5- through the cable guide.

-- Align the new heating element -2- on the seat cushion -1-. Do not remove the protective film while doing so.

-- Remove the protective films -4- one after the other from the adhesive tape -3- at the same time do not damage the heating element.

-- Glue the heating elements so that they align with the old heating elements and are free of wrinkles.

-- Route the connections to the individual heating elements in the base of the gaps.