Backrest Cover And Cushion, Separating: Removing

-- Remove the headrest. Refer to HEADREST, REMOVING AND INSTALLING .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Open the molding fastener -4- using the :3370 .

-- Roll the front and rear backrest cover -1- upward.

-- Pull up the backrest cover -1- in order to reach the right and left upholstery clips -5-.

-- Open the upholstery clips -5- using pliers -6-.

-- Pull the backrest cover -1- on the cushion -7- upward.

-- Continue pulling the backrest cover -1- up in order to reach the next upholstery clips -5-.

-- Loosen the clip -3- from both sides of the back of the backrest frame -2-.

-- To do so, use the :3409 .

-- Open the upholstery clips -5- on the backside.

-- Continue pulling the backrest cover -1- up in order to reach the remaining upholstery clips -5-.

-- Guide out the backrest cover at the headrest locking mechanism.

-- Remove the backrest cover from the backrest cushion.