Overview - Tire Pressure Monitoring Sensor

Fig 1: Exploded View Of Pressure Sensor

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. Tire Pressure Monitoring Sensor --
   • Left Front Tire Pressure Monitoring Sensor -G222-
   • Right Front Tire Pressure Monitoring Sensor -G223-
   • Left Rear Tire Pressure Monitoring Sensor -G224-
   • Right Rear Tire Pressure Monitoring Sensor -G225-
   • Removing and Installing. Refer to TIRE PRESSURE MONITORING SENSORS -G222- / -G223- / -G224- / -G225-, REMOVING AND INSTALLING .
2. Bolt
   • Flat head square head screw
   • Is supplied as a replacement part with the tire pressure monitoring sensor. Refer to the Parts Catalog.
3. Metal Valve
   • Is supplied as a replacement part with the tire pressure monitoring sensor. Refer to the Parts Catalog.
4. Valve Insert
   • Replace at every tire change
5. Rim
6. Union Nut
   • 4 Nm
     • Do not counterhold on the metal valve when tightening
     • A washer in the union nut causes the metal valve to be bolted down first to the Tire Pressure Monitoring Sensor -- when tightening. After the washer breaks, the Tire Pressure Monitoring Sensor -- will be bolted to the rim.
   • Always replace if removed
7. Valve Cap