Rear Lid Closing Button -E574-, REMOVING AND INSTALLING: Removing
CAUTION:
Risk of damaging the component surfaces.
- When positioning a prying tool, put commercially available adhesive tape over the component in the visible area.
-- Release the catches in direction of -arrows- on the Rear Lid Closing Button -E574- -2- using the : T10383/1 .
-- Remove the Rear Lid Closing Button -E574- -2- from the rear lid lower trim panel.
-- Release and disconnect the connector -1-.
If the Rear Lid Closing Button -E574- cannot be removed as described, then:
-- Remove the rear lid lower trim panel. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .
-- Unclip the Rear Lid Closing Button -E574- from the rear lid lower trim panel from the inside.