Headlamp Range Control Adjuster -E102-, REMOVING AND INSTALLING: Removing

-- Remove the Rotary Light Switch -EX1-. Refer to Rotary Light Switch -EX1-, REMOVING AND INSTALLING .

-- Remove the bolt -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the trim -2- from the instrument panel cover -1-.

-- Release and disconnect the connectors.

-- Remove the Headlamp Range Control Adjuster -E102- -2- from the rear side of the trim -1- in the direction of -arrow A-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.