Turbocharger Air Duct Pipe/Charge Air Cooler, Removing And Installing
-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Loosen the hose clamps -arrows- and remove the left charge air hose -A-.
-- Free up the wiring harness -1 and 2-.
-- Remove the bolt -3-.
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Free up the wiring harness -1- from the air duct pipe.
-- Loosen the screw-type clamp -2-.
-- Remove the screw -3-.
-- Remove the air duct pipe -4- upward.
Installing
-- Install in reverse order of removal and note the following:
Tightening specifications. Refer to OVERVIEW - CHARGE AIR SYSTEM .