Overview - Lock Carrier

Special tools and workshop equipment required 

• Bumper Adjusting Tool: T40281 

Fig 1: Exploded View Of Lock Carrier

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. Lock Carrier with Attachments
   • Removing and Installing. Refer to LOCK CARRIER, REMOVING AND INSTALLING .
   • Service Position, Implementing and Resetting. Refer to SERVICE POSITION, SETTING AND RESETTING .
2. Bolts
   • 8 Nm
   • Quantity: 3 on each side
3. Bracket
   • Left and right
   • Two-part
   • Use the Bumper Adjusting Tool: T40281  to adjust the adjusting screw
4. Bolts
   • 8 Nm
   • Quantity: 2 on each side
5. Air Duct
   • Left
   • There are different versions. Refer to the Parts Information for the allocation.
6. Bumper Carrier
7. Bolts
   • 55 Nm
   • Quantity: 4 on each side
8. Pedestrian Protection
   • Not installed in all markets
9. Pop Rivet
   • Quantity: 2
10. Guide
11. Foam Piece
12. Air Duct
    • Right
    • There are different versions. Refer to the Parts Information for the allocation.
13. Air Duct
    • Upper
14. Support
    • Left and right
15. Bolts
    • 8 Nm
    • Quantity: 3 on each side
16. Cover
    • Removing and Installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .