Driver And Passenger Side Rear Power Window Button -E711- / -E713-, Removing And Installing
NOTE:
The removal and installation is described for the left side. The removal and installation on the right side is similar.
-- Remove the rear armrest. Refer to REAR ARMREST, REMOVING AND INSTALLING .
-- Release the hook in the direction of the -arrow A- with a small screwdriver.
-- Release the mounting tab -2- in the direction of the -arrow B-.
-- Take the power window switch -3- out of the switch mount and remove it to the rear.
-- Release and disconnect the connector -1-.
Installing
Install in reverse order of removal.