Overview - Steering Column Switch Module

Fig 1: Exploded View Of Steering Column Switch Module, With Electronic Ignition Switch

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Start System Button -E378-
- Component Location Overview. Refer to COMPONENT LOCATION OVERVIEW - CONTROLS IN CENTER CONSOLE .
Steering Column Electronics Control Module -J527-
- With Airbag Spiral Spring/Return Spring with Slip Ring -F138-
- Removing and installing. Refer to Steering Column Electronics Control Module -J527-, REMOVING AND INSTALLING .
  CAUTION:
  Risk of damaging the return ring.
  - The return spring with slip ring must not be turned after removing.
Bolt
- 1.1 Nm
- Quantity: 3
Mount
- With Turn Signal Switch -E2-, Windshield Wiper Intermittent Mode Switch -E22-
- Removing and installing. Refer to Turn Signal Switch -E2-, REMOVING AND INSTALLING .
Steering Column Combination Switch Base Carrier
- Removing and installing. Refer to STEERING COLUMN COMBINATION SWITCH MOUNT, REMOVING AND INSTALLING .
Bolt
- 1.1 Nm
Electronic Steering Column Lock Control Module -J764-
- Removing and installing. Refer to STEERING COLUMN, REMOVING AND INSTALLING
Bolt
- 9 Nm
- For the base carrier for the steering column combination switch
- Quantity: 2
Ignition Key
Anti-Theft Immobilizer Reader Coil -D2-
- Removing and installing. Refer to Anti-Theft Immobilizer Reader Coil -D2-, REMOVING AND INSTALLING .