Left License Plate Lamp -X4- / Right License Plate Lamp -X5-, BULB REMOVING AND INSTALLING

NOTE:

The entire license plate lamp must be replaced if a license plate lamp LED is faulty.

Removing

-- Turn off the ignition and all electrical equipment.

-- If equipped, turn the key to the 0 position (pre-lock).

-- Turn the lamp socket -1- in the direction of -arrow- to release it and pull it out of the license plate lamp.

Fig 1: Identifying Bulb Socket

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Installing

Installation is performed in the reverse order of removal, noting the following:

-- Perform a function test.