LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Passat R-Line >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> Exhaust System & Emission Controls System (Service Information - DDSB, DDSA) >> 26 Exhaust System, Emission Controls >> Exhaust Pipes/Mufflers >> Clamping Sleeve Installation Position

Clamping Sleeve Installation Position

GWWN26-10302Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

A - Marking

1 - Clamping Sleeve

2 - Front Exhaust Pipe

3 - Nut 30 Nm

4 - Nut 30 Nm

a - Installed Dimension: approximately 0.5 cm

GWWN26-10943Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the clamping sleeve so that the bolt end -arrow- does not project beyond the lower edge of clamping sleeve.