SERVICE INTERVAL DISPLAY, RESETTING, WITHOUT Vehicle Diagnostic Tester FROM MY 2014

WARNING: This page is about a different variant/trim than selected.

Resetting the Oil Change Service

Using the buttons in the instrument cluster.

If the vehicle does not have and instrument cluster text display.

-- With the ignition turned off, press the -3- button and hold it pressed.

Fig 1: Identifying Instrument Cluster Buttons (2012 Beetle)

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Switch on the ignition.

-- Release the button -3- and press the button -1- within 20 seconds.

The service interval display is now in reset mode.

After a brief period, the display switches back to the normal display.

If the vehicle does have and instrument cluster text display.

-- With the ignition turned off, press the -3- button and hold it pressed.

Fig 2: Identifying Instrument Cluster Buttons (2012 Beetle)

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Switch on the ignition.

-- Release button -3-.

The confirmation request appears in the instrument cluster display.

-- By pressing the button -1- in the windshield wiper lever

Fig 3: Identifying Rocker Switch On Windshield Wiper Lever

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- or in the multifunction steering wheel by pressing the button -5- to confirm.

Fig 4: Identifying Multifunction Steering Wheel Buttons (All Models Except 2004-08 Golf Sedan & 2004 R32)

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The service interval display is now in reset mode.

After a brief period, the display switches back to the normal display.

Resetting the Inspection Service

Using the buttons in the instrument cluster.

If the vehicle does not have and instrument cluster text display.

-- Turn off the ignition.

-- Emergency flasher switched on.

-- Press and hold the button -3-.

Fig 5: Identifying Instrument Cluster Buttons (2012 Beetle)

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Switch on the ignition.

-- Release the button -3- and press the button -1- within 20 seconds.

-- Turn off the emergency flasher.

The service interval display is now in reset mode.

After a brief period, the display switches back to the normal display.

If the vehicle does have and instrument cluster text display.

-- Turn off the ignition.

-- Emergency flasher switched on.

-- Press and hold the button -3-.

Fig 6: Identifying Instrument Cluster Buttons (2012 Beetle)

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Switch on the ignition.

-- Release button -3-.

The confirmation request appears in the instrument cluster display.

-- By pressing the button -1- in the windshield wiper lever

Fig 7: Identifying Rocker Switch On Windshield Wiper Lever

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- or in the multifunction steering wheel by pressing the button -5- to confirm.

Fig 8: Identifying Multifunction Steering Wheel Buttons (All Models Except 2004-08 Golf Sedan & 2004 R32)

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Turn off the emergency flasher.

The service interval display is now in reset mode.

After a brief period, the display switches back to the normal display.