Hid Headlamps, Adjusting

WARNING: This page is about a different variant/trim than selected.

Right Headlamp Lateral and Height Adjustment:

Adjusting screws for left headlamp are a mirror image.

Fig 1: Identifying Adjustment Screws

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Adjusting screw (inner hex socket) for height adjustment of low beam cut-off line -1-.
Adjustment screw (inner hexagon) for lateral adjustment of low beam cut-off line -2-.

NOTE:

In some markets the lateral adjustment adjusting screw -2- is sealed. Lateral adjustment is not permitted.

-- First turn adjustment screw -1- to adjust height of cut-off line.

-- Then the side adjustment must be checked and corrected with adjustment screw -2- if necessary.

NOTE:

Adjusting the left headlamp is in the same sequence.

The adjusting screws for left headlamp are a mirror image.