LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 64 (General Information (Convertible)) >> General Information >> Procedure Descriptions >> "Upper" ENGINE COVER, REMOVING AND INSTALLING >> Engine Cover, Removing And Installing, 1.8L (125KW) And 2.0L (1555 Kw) TSI Engine >> Removing

Engine Cover, Removing And Installing, 1.8L (125KW) And 2.0L (1555 Kw) TSI Engine: Removing

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Engine Cover
GWWM10-10097Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Carefully pull the engine cover off of the retaining pins -arrows- one after the other.

NOTE:

Do not pull on the engine cover abruptly to remove it or pull on one side.