LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 64 (General Information (Convertible)) >> General Information >> Procedure Descriptions >> "Upper" ENGINE COVER, REMOVING AND INSTALLING >> Engine Cover, Removing And Installing, 1.8L (125KW) And 2.0L (1555 Kw) TSI Engine >> Installing

Engine Cover, Removing And Installing, 1.8L (125KW) And 2.0L (1555 Kw) TSI Engine: Installing

WARNING: This page is about a different variant/trim than selected.

-- Position the engine cover.

-- Press the engine cover first in the rubber grommets on the left side and then in the rubber grommets on the right side.

NOTE:

To avoid damage, do not hit the engine cover with fist or a tool.

scientia non olet · About LEMON Manuals