Driver/Front Passenger Vanity Mirror Lamp -W20- / -W14-, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Carefully pry the Front Passenger Vanity Mirror Lamp -W14- -1- from the roof trim panel using the : 3409 .
-- Release and disconnect the connector -arrow-.
Fig 2: Front Passengers Illuminated Make-Up Mirror W14 And Drivers Illuminated Make-Up Mirror W20 Electrical Connection
-- Push the contact plate -1- for the lamp in the direction of the -arrow-.
-- Remove the tubular bulb -2- out of the bulb socket.