Driver/Front Passenger Vanity Mirror Lamp -W20- / -W14-, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
Install in the reverse order of removal while noting the following:
CAUTION:
There is a risk of damaging the bulb.
- Do not touch bulb glass of bulb with bare fingers. Fingers will leave traces of grease on the bulb glass which, when the bulb is switched on, will evaporate and cloud the bulb glass.
- Use clean gloves for example to insert the bulbs.
-- Insert the vanity mirror lighting into the opening and engage it on the opposite side.
-- Perform a function test.