Central Locking -Safe- Indicator Lamp -K133-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different variant/trim than selected.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove the driver front door trim panel. Refer to FRONT DOOR TRIM PANEL, REMOVING AND INSTALLING .
-- Release and disconnect the connector.
-- Release the retaining tab on the Central Locking -Safe- Indicator Lamp -K133- -2- by pressing -arrows-.
-- Remove the Central Locking -Safe- Indicator Lamp -K133- -2- from the mount -1-.