Washer Nozzles, Adjusting
WARNING: This page is about a different variant/trim than selected.
CAUTION:
There is a risk of damage.
- Do not use any objects to clean the washer nozzles!
Remove the washer nozzle if the spraying field is uneven due to dirt in the nozzle, and flush the nozzle out with water opposite the spray direction. It is then permitted to blow compressed air opposite the spray direction. Do not use any objects to clean the washer nozzles.
-- Adjusting washer nozzles for front windshield washer system. Refer to => 14.3Procedure Descriptions.