EVAPORATOR, CLEANING WITH Suction Feed Spray Gun :VAG1538 AND SPRAY NOZZLE
WARNING: This page is about a different variant/trim than selected.
Spray off the evaporator directly with the cleaning solution using a spray lance (approximately 10 bar (145.03 psi)). The cleaning solution neutralizes microbes and bacteria contamination directly on the evaporator.
To make it possible to access the evaporator, some prework and different spray nozzles are needed, for example VAG1538/5;VAG1538/6 orVAG1538/7.
A vehicle-specific instruction booklet is included with the evaporator cleaning solution D 600 100 A2
Current devices and spray lances. Refer to the Parts Information.