Steering Lock Housing, Removing And Installing: Removing

-- Remove the steering column combination switch. Refer to Turn Signal Switch -E2-, REMOVING AND INSTALLING .

-- Remove the shear bolt -1- using the :T10424US  .

Fig 1: Identifying Steering Column Switch Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

If the shear bolts cannot be removed using the :T10424US  , use an angled drill and an 8.5 mm diameter bit to drill it out.

-- Remove the steering lock housing -3- and the steering column switch base carrier -2- toward the rear from the steering column.

-- Remove the steering lock housing from the steering column combination switch base carrier.