Lock Cylinder, Removing And Installing: Installing

-- Insert the ignition key into the lock cylinder -1- and turn the key to the "Run" position.

Fig 1: Identifying Direction To Release Lock Cylinder Securing Lever With Wire

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unlock the lever -3- with steel wire -2- in direction of -arrow-.

-- Insert the lock cylinder -1- into the steering lock housing.

The Anti-Theft Immobilizer Reading Coil -D2- connection must be inserted into the guide on the steering lock housing.

-- Remove the steel wire -2- from the lock cylinder -1- and then make sure the lock cylinder fit securely in the steering lock housing.

-- Connect the connector to the Anti-Theft Immobilizer Reader Coil -D2-.

-- Connect the Battery -A-. Refer to BATTERY, DISCONNECTING AND CONNECTING .

Install in reverse order of removal.