Ignition Switch Key Lock Solenoid -N376-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different variant/trim than selected.
-- Disconnect the Battery -A-. Refer to BATTERY, DISCONNECTING AND CONNECTING .
-- Remove the lower steering column trim panel. Refer to LOWER STEERING COLUMN TRIM PANEL, REMOVING AND INSTALLING .
-- Release the catch on both sides using a screwdriver in the direction of the -arrow A-.
-- At the same time pull the Ignition Switch Key Lock Solenoid -N376- -1- in the direction of the -arrow B- from its mount on the steering lock housing -3-.
The connector -2- will be separated at the same time.