Special Tools
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Trim Release Lever:T10039
- 7/16 Inch Extractor:T10424US
- Hot Air Blower: VAG1416
- Torque Screwdriver: VAG1624
- Adhesive Strip Remover: VAS6349
- Calibration Unit: VAS6350A
- Calibration Tool - Wheel Center Mountings: VAS6350/1
- Calibration Tool - Spacing Laser: VAS6350/2
- Calibration Tool - Linear Laser: VAS6350/3A