Left and Right License Plate Lamp -X4- / -X5-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different variant/trim than selected.

-- Turn off the ignition and all electrical equipment and remove the ignition key.

-- Press the tab -1- in the direction of the -arrow- and remove the license plate lamp downward from the bumper cover.

Fig 1: Identifying License Plate Lamp Tab And Bumper Cover

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release and disconnect the connector -arrow-.

Fig 2: Disconnecting Harness Connector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.