Left And Right License Plate Lamp Bulb -X4- / -X5-, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal while noting the following:

CAUTION:

There is a risk of damaging the headlamp.

Do not touch bulb glass of bulb with bare fingers. Fingers will leave traces of grease on the bulb glass which, when the bulb is switched on, will evaporate and cloud the bulb glass.
Use clean cloth gloves to insert the bulbs.
Make sure the bulb socket is seated correctly when installing them. Water getting in the license plate lamp will cause damage.

-- Check the function of the license plate lamp.