Left/Right Position Lamp Bulb -M1- / -M3-, Removing And Installing, Halogen Headlamp: Installing
WARNING: This page is about a different variant/trim than selected.
Install in the reverse order of removal while noting the following:
CAUTION:
There is a risk of damaging the headlamp.
- Do not touch bulb glass of bulb with bare fingers. Fingers will leave traces of grease on the bulb glass which, when the bulb is switched on, will evaporate and cloud the bulb glass.
- Use clean cloth gloves to insert the bulbs.
- During installation, ensure proper seating of the housing cover. Water getting in the headlamp will cause damage.
-- Install the headlamp. Refer to HEADLAMP, REMOVING AND INSTALLING .
-- Check the headlamp functions.
-- Check the headlamp adjustment and adjust the headlamp. Refer to HEADLAMP, ADJUSTING .