Left And Right Hid Headlamp Control Module -J343- / -J344-, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
Install in the reverse order of removal while noting the following:
CAUTION:
Make sure the seal fits correctly when installing the HID headlamp control module. Water getting in the headlamp will cause damage.
-- Make sure the seal between the control module and the headlamp is not damaged.
-- Install the headlamp. Refer to HEADLAMP, REMOVING AND INSTALLING .
-- Check the headlamp functions.
-- Check the headlamp adjustment and adjust the headlamp. Refer to HEADLAMP, ADJUSTING .