LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 59 (Exterior Lights, Switches (1 Of 2) (Convertible)) >> 94 Exterior Lights, Switches >> Headlamps >> Headlamp Carrier Plate, Removing And Installing >> Installing

Headlamp Carrier Plate, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal while noting the following:

-- Install the headlamp. Refer to HEADLAMP, REMOVING AND INSTALLING .

-- Make sure the gap around the headlamp is even all the way around. Refer to HEADLAMP INSTALLATION POSITION, CORRECTING .

If the gap dimensions are uneven, then adjust the headlamp installation position. Refer to HEADLAMP INSTALLATION POSITION, CORRECTING .

-- Check the headlamp functions.

-- Check the headlamp adjustment and adjust the headlamp. Refer to HEADLAMP, ADJUSTING .

scientia non olet · About LEMON Manuals