Left/Right Front Fog Lamp Bulb -L22- / -L23-, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal while noting the following:

CAUTION:

There is a risk of damaging the headlamp.

Do not touch bulb glass of bulb with bare fingers. Fingers will leave traces of grease on the bulb glass which, when the bulb is switched on, will evaporate and cloud the bulb glass.
Use clean cloth gloves to insert the bulbs.
Make sure the bulb socket is seated correctly when installing them. Water getting in the fog lamp will cause damage.

-- Perform a function test.

-- Check and correct the fog lamp adjustment. Refer to FOG LAMP, ADJUSTING .