LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 59 (Exterior Lights, Switches (1 Of 2) (Convertible)) >> 94 Exterior Lights, Switches >> Blind Spot Detection >> Blind Spot Detection Control Module/Module 2 -J1086- / -J1087-, Removing And Installing >> Installing

Blind Spot Detection Control Module/Module 2 -J1086- / -J1087-, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal while noting the following:

The blind spot detection calibration normally occurs automatically.

Static calibration is only required when there is a DTC memory entry.

scientia non olet · About LEMON Manuals