LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 53 (Air Conditioning (Refrigerant R1234YF Servicing) (2 Of 2) (Convertible)) >> 87 Air Conditioning >> Refrigerant Circuit >> Refrigerant Circuit, Cleaning >> Adapter For Assembling Flushing Circuit >> Touareg Hybrid from MY 2018

Touareg Hybrid from MY 2018

WARNING: This page is about a different variant/trim than selected.
Refrigerant Lines to A/C Compressor Flushing Adapter Expansion Valve Flushing Adapter Miscellaneous Adapters Miscellaneous
Low pressure side
  • Refrigerant Circuits Adapter Set 1 - Adapter 12 :VAS6338/12  connected to the A/C Service Station and the Refrigerant Circuit Adapter Set - Adapter:VAS6338/48  .
High pressure side
  • Refrigerant Circuits Adapter Set 1 - Adapter 3 :VAS6338/3 
  • Expansion Valve :VAS6338/44 
or 		Receiver/Dryer-- No adapter required, dryer is removed from receiver/dryer on condenser and the opening is sealed.-- Install a new reservoir (dryer) after the flushing procedure.Shut-off valve-- Shut-off valve (Heater and A/C Unit Refrigerant Shut-Off Valve -N541-) is removed and a Shut-Off Valve :VAS6338/42  is installed in its place. Replace the Heater and A/C Unit Refrigerant Shut-Off Valve -N541- after flushing. -- Using the Vehicle Diagnostic Tester start the "Refrigerant circuit, charging" function in the "Basic setting".
  • Doing so opens the electric valves on the refrigerant circuit.
  • The function is active and can only be ended when the refrigerant circuit has been flushed.
  • Keep the Vehicle Diagnostic Tester connected so that the valves stay open.
scientia non olet · About LEMON Manuals