Rear Brake Cable, Removing And Installing: Removing
-- Loosen the wheel bolts.
-- Raise the vehicle.
-- Remove the wheel.
-- Loosen the parking brake.
Vehicles without Center Armrest
-- Remove the mat from the storage compartment.
-- Open access cover -1- in the center console.
Vehicles with Center Armrest
-- Remove the cover -1- on the center armrest -2-.
-- Remove the nut -1- on the center armrest -2-.
-- Remove the center armrest. Refer to FRONT CENTER ARMREST, REMOVING AND INSTALLING .
Continuation for All Vehicles
-- Loosen the adjusting nut -1- until it is possible to disengage the brake cable -2- from the compensator bracket.
-- Press the lever -2- on the brake caliper in the direction of -arrow- and disengage the brake cable -1-.
-- Press the tabs -3- together and remove the brake cable from the bracket -4- on the brake caliper.
-- Unclip the brake cable -1- from the tab -arrow A- of the bracket -2-.
-- Pull the brake cable -1- in the direction of -arrow- out of the guide -arrow B- on the bracket -2-.
-- Disengage the brake cable -1- from the bracket -2- and pull it from the guide tube -3-.