LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 50 (Hydraulic Components (Convertible)) >> 47 Hydraulic Components >> Vacuum System >> Vacuum System, Checking >> Brake Servo Tester: VAS6721, CONNECTING

Brake Servo Tester: VAS6721, CONNECTING

WARNING: This page is about a different variant/trim than selected.

Special tools and workshop equipment required 

-- Pull the vacuum hose -1- from the brake booster -2-.

Fig 1: Identifying Vacuum Hose
GWWN47-10224Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Pressing the brake pedal a few times beforehand makes it easier to remove the vacuum hose.

-- Connect the : VAS6721  -see following illustrations-.

Fig 2: Connecting Brake Booster VAS6721
GWWN47-10223Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Position Component Explanation
A Shut-off valve In the direction toward the vacuum hose, the check valve and vacuum pump (if equipped)
B Shut-off valve
  • Opening makes the : VAS6721  removal easier.
  • Open to simulate a malfunction source
  • Connect the : VAS6213  .
C Shut-off valve In the direction toward the brake booster

-- Connect the : VAS6721  hose -A- to the vacuum hose.

Fig 3: Connect The - VAS 6721- Hose -A- Too The Vacuum Hose And Push The Adapter -C- Into The Brake Booster.
GWWN47-10209Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push the adapter -C- into the brake booster.