LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 50 (Hydraulic Components (Convertible)) >> 47 Hydraulic Components >> Vacuum System >> Vacuum Sensor -G608-, REMOVING AND INSTALLING

Vacuum Sensor -G608-, REMOVING AND INSTALLING

WARNING: This page is about a different variant/trim than selected.

Removing 

Remove the vacuum line, if necessary -item  ) OVERVIEW - BRAKE BOOSTER/BRAKE MASTER CYLINDER - List Item: Vacuum Line.

-- Release clips with pliers -1-.

Fig 1: Identifying Brake Booster Pressure Sensor G294, Clips And Pliers
GWWA47-10021Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Carefully pry out the Brake Booster Pressure Sensor -G294- -2-.

scientia non olet · About LEMON Manuals