Brake Caliper Piston, Removing And Installing: Removing

-- Insert the : T10165  so that the collar touches the piston.

Fig 1: Identifying Installation And Operation Of Plate T10165

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the piston from the brake caliper by turning the thumbwheel toward the left.

-- For pistons that are difficult to move, an open end wrench (size 13 mm) can be positioned at the appropriate wrench surfaces -arrow A-.

-- Remove the seal using the : 3409  .

Fig 2: Identifying Wedge 3409 To Remove Seal

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.