Master Brake Cylinder, Removing And Installing, RHD With 4-Cylinder Gasoline Engine: Installing

Install in reverse order of removal while noting the following:

-- When assembling the brake master cylinder with the brake booster, make sure that the pushrod is correctly seated in the brake master cylinder.

-- Make sure the seal fits correctly when attaching the master brake cylinder to the brake booster  ) OVERVIEW - BRAKE BOOSTER/BRAKE MASTER CYLINDER, RHD - List Item: Seal.

-- Bleed the brake system. Refer to HYDRAULIC SYSTEM, STANDARD BLEEDING .

Vehicles with Manual Transmission: 

-- Bleed the clutch. Refer to the appropriate service information .

NOTE:

To prevent the brake fluid from overflowing from the reservoir, the level must not be over the MAX mark -1-.

Fig 1: Identifying Brake Fluid Level Marks On Reservoir

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.