ABS Control Module -J104- AND ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING, LHD VEHICLES WITH A DIESEL ENGINE: Notes

Special tools and workshop equipment required 

• Torque Wrench 1331 5-50Nm: VAG1331 
• Open Ring Spanner Insert - AF 11mm: V.A.G 1410/6 
• Torque Wrench - Universal Joint : V.A.G 1410/7 
• Mini Torque Wrench: VAS 6854 
• Brake Pedal Actuator: VAG1869/2  .
• Torque Wrench - Assembly Tool : VAG1410/8 

Special tools and workshop equipment required 

• Hose Clip Pliers: VAS 6340 
  Fig 2: Hose Clip Pliers VAS6340

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Bleeder Bottle
  Fig 3: Brake Charger/Bleeder Unit VAS5234

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Brake Bleeding Tool Set: VAS 6564 
  Fig 4: Identifying Tool Set : VAS6564 For Brake Bleeding

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Plugs assembly part 5Q0 698 311 

1 -  M10 Plug

2 -  M12 Plug

Plugs 1H0 698 311 A 

Install the transportation protection after removing the ABS Hydraulic Unit -N55-.

The warranty on the ABS Hydraulic Unit -N55- will not be honored if there is no transportation protection.

1 -  Transportation protection for valve body (foam)

2 -  M10 plugs

3 -  M12 plugs