ABS Control Module -J104- /ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING, WITH 4-CYLINDER GASOLINE ENGINE AND ABS MARK 60 EC ABS/EDL/ASR/ESP: Notes

Special tools and workshop equipment required 

• Torque Wrench 1331 5-50Nm: VAG1331 
• Open Ring Spanner Insert - AF 11mm: VAG1410/6 
• Torque Wrench - Universal Joint : VAG1410/7 
• Mini Torque Wrench: VAS6854 
• Brake Pedal Actuator: VAG1869/2  .
• Torque Wrench - Assembly Tool : VAG1410/8 
• Hose Clip Pliers: VAS6340 
• Bleeder Bottle
• Brake Bleeding Tool Set: VAS6564 
• Engine Bung Set: VAS6122 

Plugs 5Q0 698 311 

Fig 1: Plug 5 Q 0 698 311

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1 -  M10 Plug

2 -  M12 Plug

Plugs 1H0 698 311 A 

Fig 2: Identifying Sealing Plug Repair Set, Part No. 1H0 698 311 A

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Install the transportation protection after removing the ABS Hydraulic Unit -N55-.

The warranty on the ABS Hydraulic Unit -N55- will not be honored if there is no transportation protection.

1 -  Transportation Protection for Valve Body (Foam)

2 -  M10 Plugs

3 -  M12 Plugs