LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 47 (Seat Frames (Convertible)) >> 72 Seat Frames >> Front Seats >> Torsion Bar Bearing, Removing And Installing >> Installing

Torsion Bar Bearing, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.
WARNING:

The torsion bar exhibits considerable spring force. Always follow the points below to avoid accidents:

  • Always remove and install the torsion bar in the sequence described and only using the tools specified.
  • Never use pliers and other levers.
  • Do not stand directly in front of the torsion bar when removing and installing it. Stand off to the side.

Install in reverse order of removal.

scientia non olet · About LEMON Manuals