LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 47 (Seat Frames (Convertible)) >> 72 Seat Frames >> Front Seats >> Lumbar Support Adjuster, Removing And Installing >> Installing

Lumbar Support Adjuster, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

-- Install in reverse order of removal.

Fig 1: Identifying Lumbar Adjustment Lever Components
GWWM72-10004Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

Make sure the splines on the lumbar support adjusting lever -1- align with the splines on the shaft -2-.

scientia non olet · About LEMON Manuals