LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 47 (Seat Frames (Convertible)) >> 72 Seat Frames >> Front Seats >> Gliding Piece, Removing And Installing >> Removing

Gliding Piece, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Release the seat forward/back adjustment.

-- Slide the front seat all the way back.

-- Unlatch the front seat using the entry assistance handle.

-- Fold the backrest forward and move the seat all the way forward at the same time.

-- Remove the rear screw on the tunnel side from the seat.

-- Slide and release the rocker switch -arrow A- from the gliding piece in the direction of the -arrow-.

Fig 1: Identifying Slider
GWWA72-10789Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the gliding piece -1- from the seat rail -2- toward the rear by tipping it slightly toward the tunnel.