Entry Assistance Release Cable B, Removing And Installing: Removing

-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .

-- Remove the trim on the tunnel side. Refer to TUNNEL-SIDE SEAT TRIM, REMOVING AND INSTALLING .

-- Move the backrest forward as far as the stop using the hand wheel.

-- Disengage the >>entry assistance<< cable B -3- for the seat forward/back adjustment -2-.

Fig 1: Identifying Entry Assistance Release Cables

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the >>entry assistance<< cable B eyelets -3- from the seat rail bolts -arrow-.

-- Remove the backrest from the tunnel side.

-- Remove the >>entry assistance<< cable B eyelets -1- from the backrest hinges -arrow-.

Fig 2: Identifying Entry Assistance Cable B Eyelets

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the tabs together -arrow- and remove the >>entry assistance<< cable B -1- from the backrest hinges.

Fig 3: Identifying Entry Assistance Cable B

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the >>entry assistance<< cable B -1- through the slits for the backrest hinges.