Entry Assistance Release Cable B, Removing And Installing: Installing

-- Install the >>entry assistance<< cable B eyelets -1- first on the backrest hinge bolts -arrow-.

Fig 1: Identifying Entry Assistance Cable B Eyelets

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Thread in and attach the >>entry assistance<< cable B -1- through the slits for the backrest hinges, to the point where the tabs -arrows- engage.

Fig 2: Identifying Entry Assistance Cable B

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the >>entry assistance<< cable B eyelets -3- on the seat rail bolts -arrow-.

Fig 3: Identifying Entry Assistance Release Cables

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Attach the >>entry assistance<< cable B -3- to the seat forward/back adjustment -2-.

Further installation is the reverse order of removal.

When installing, make sure that the release cables -1 and 2- are routed as shown. Never cross the release cables!

Fig 4: Identifying Release Cables

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.