Entry Assistance Release Cable A, Removing And Installing: Removing

-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .

-- Remove the trim on the tunnel side. Refer to TUNNEL-SIDE SEAT TRIM, REMOVING AND INSTALLING .

-- Move the backrest forward as far as the stop using the hand wheel.

-- Disengage the >>entry assistance<< cable A support bracket -1- from the seat forward/back adjuster -2-.

Fig 1: Identifying Entry Assistance Release Cables

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disengage the >>entry assistance<< release cable A -1- at the seat forward/back adjuster -2- and remove it.

Fig 2: Disengage Entry Assistance Release Cable A -1- At Seat Forward/Back Adjuster -2- And Remove It

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the >>entry assistance<< release cable A -1- from the backrest hinges.

Fig 3: Disengage Entry Assistance Release Cable A -1- At Backrest Hinge

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the guides for the >>entry assistance<< release cable A -2- from the seat frame.