Backrest Release Trim, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Press the handle -arrow B- forward as far as the stop and hold it in that position.
-- Remove the retaining strap -arrow A- in the direction of the -arrow- from the tab -arrow C- with the : 3409 .
-- Perform the same step on the opposite side of the trim -1-.
-- Tilt the trim -1- upward diagonally and remove from the handle with the bracket -2-.
-- Disengage the rear trim catch from the handle with bracket.
-- Remove the trim from the bracket with handle.