Front Thorax Airbag With Igniter, Removing And Installing: Removing
Follow the General Safety Precautions when working with airbags, belt tensioners and battery cut-out units (pyrotechnic components). Refer to SAFETY PRECAUTIONS .
-- Disconnect the battery ground cable with the ignition turned on. Refer to BATTERY, DISCONNECTING AND CONNECTING .
-- Remove the left front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Remove the trim on the tunnel side. Refer to TUNNEL-SIDE SEAT TRIM, REMOVING AND INSTALLING .
-- Remove the backrest adjustment wheel. Refer to BACKREST ADJUSTER, REMOVING AND INSTALLING .
-- Remove the seat height adjustment handle. Refer to SEAT HEIGHT ADJUSTMENT HANDLE, REMOVING AND INSTALLING .
-- Remove the trim on the door sill side. Refer to SILL-SIDE SEAT TRIM, REMOVING AND INSTALLING .
-- Remove the backrest. Refer to FRONT BACKREST, REMOVING AND INSTALLING .
-- Remove the cover and the backrest cushion. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING .
-- Disconnect the connector -1- from the thorax airbag -2-.
-- Remove the wire -3- from the tabs -arrows-.
-- Remove the bolt -4-.
-- Remove the retainer -1- for the thorax airbag -2- from the backrest frame mount -3-.
-- Remove the thorax airbag -2- from the backrest frame -3-.